Fence Installation Cost Calculator — By Material & Height
Who this is for: For homeowners and contractors pricing a fence installation.
Linear feet, height, material and gates in — materials + labor + gates itemized.
Quick answer: Fence installation: chain link $10–18/ft, wood $15–25/ft, vinyl $25–37/ft. 150 ft 6-ft wood fence with 1 gate: $3,750–5,250. Height factor: 8 ft = +33%. Gates: $300 each.
linear ft
measure the yard perimeter
ft
6 ft is code max in most backyards
× $300
walk gates; driveway doubles: $600–1,200
Installed total
$4,050
150 ft, wood, 6 ft
Per linear ft
$27.00
all-in
Height factor
×1.00
vs 6 ft baseline
Materials (wood)$2,250
Installation labor$1,500
Gates × 1$300
Total$4,050
Before the crew arrives: call 811 for utility locate (free, mandatory), check city height code (front yards typically 3–4 ft), and get HOA approval in writing. A disputed property line is worth a $300–800 survey — fences on the wrong side get moved at your expense.
Height scales cost against a 6 ft baseline. Gates add $300 each. Quote assumes clean lines and open access — rocky soil and old-fence removal add $3–8/ft.
Core facts
| Wood | $15 + $10 install /ft |
|---|---|
| Vinyl | $25 + $12 install /ft |
| Chain link | $10 + $8 install /ft |
| Gates | $300 each |
| Height factor | 6 ft baseline · 8 ft +33% |
| Status | 2026 US industry averages compiled from HomeAdvisor, Angi, and contractor quotes. Estimates for budgeting — real quotes depend on location, materials, and job complexity. |
How much does fence installation cost?
Fence installation runs $10–50 per linear foot depending on material: chain link $10–18, wood $15–25, vinyl $25–37, composite $30–45, wrought iron $35–53. A 150 ft 6-ft wood fence with 1 gate: $3,750–5,250. Height matters: 8 ft fence costs 33% more than 6 ft. Gates add $300 each.
Common uses
- Budgeting a new fence installation
- Comparing wood vs vinyl vs chain link costs
- Checking contractor quotes per linear foot
- Planning gates and access points
Frequently Asked Questions
How much does fence installation cost?
$10–50/linear foot by material: chain link $10–18, wood $15–25, vinyl $25–37, composite $30–45, wrought iron $35–53. 150 ft 6-ft wood fence: $3,750–5,250 with 1 gate.
What is the cheapest fence material?
Chain link ($10–18/ft) is the cheapest. Wood ($15–25/ft) is the cheapest privacy option. Vinyl ($25–37/ft) costs 60% more than wood but lasts longer with zero maintenance.
How much does a gate cost?
$300–600 per gate depending on width and material. Double driveway gates: $600–1,200. Automatic gate openers add $1,500–3,000.
How tall can I build my fence?
Most residential codes: 6 ft max for side/back yard, 3–4 ft for front yard. Check local zoning — fences over 6 ft usually require a permit and may need engineering.
Do I need a permit for a fence?
Most areas require a permit for fences over 6 ft or in front yards. Check with your city planning department. Permit cost: $50–200.
More Outdoor & yard
Related guides
- How Much Does Tree Removal CostThe 2026 answer by tree size — full table with stump, emergency and access adders.
- Solar Panel Payback GuideGross cost, incentives, and payback math — how to know if solar pencils for your roof.
- Window Replacement vs RepairWhen a $50 fix beats a $400 replacement — the draft, fog and rot decision tree.
- HVAC Replacement Timing GuideRepair or replace, the $5,000 rule, and the best season to buy.
- Fence Installation Cost GuideMaterial picks by goal (privacy, pets, curb appeal), height rules and the permit checklist.
- EV Charger Install GuideLevel 2 step by step: panel check, circuit run, permit, and what the electrician actually does.